Check your car seat instruction manual to learn how to install the cup holders on your car seat. Alternatively, you can find instructions on how to remove your car seat cover in your instruction manual. Generally, Graco convertible seat covers can be washed in a washing machine, so you can just throw them in the washer.
To get the buckle and harness clean, use warm water. You can also use a mild detergent on your harness, but NOT on your buckle. As he felt you know salsa feel really secure and move behind the clip so great, I can click on my side NASA to remove your cargo carrier easy and fast and Jesus. It really saves your time and inconveniences upsetting people one from another angle. Once again, we can see double the seat belt through the first hole and then dangling up and smooth under the tongue.
Once you answer the second hole and to the clipping, check up the string of any slack. Pull it, if you see it stable into the chair and watch this clip ten.
Finally, you can learn how to install a car seat base. Do make sure that your seat CAN actually be installed without a base. Q: Can you use a Graco car seat without the base? Q: Should a car seat base move up and down? Manufacturers never forbid the utilization of tethers with rear-facing car seats. Best convertible car seat for tall baby. Although it may seem easy, you must understand how. It is best to read the manual carefully before installing a car seat for safety reasons.
The most important thing here is that it is correctly installed to protect your child in an accident or emergency stop. Make sure not only the installation method itself — make this unique task with Graco car seats can be quickly done in three steps. Both methods are safe. Please read and understand this manual before you install or use this child restraint. Now below, you can see details of steps on how to install a Graco car seat.
Please follow carefully. Tether Strap Stored at Top. Put a tether hook on either side of the plastic bar on the car seat. Set the car seat in a reclining position. Car seat should face rear-ward in vehicle back seat.
Ideally, the base has as flat an installation as possible. Verify the indicator level. Level ground is required for the vehicle. The car seat should indicate that it is Level. Once the blue rectangle completely encloses the bubble, it must be fully retracted. Make sure the ties are tight. Examine the indicator of Level. There must be no bubble extending beyond the blue zone. Set the seat in the reclining position. If your car seat reclines in any of the first, second, or third positions, it will be more comfortable.
Ensure the car seat is oriented rearward in the back seat. In the back seat of the vehicle, place rear-facing. Verify the indicator of Level. Ensure the vehicle is Level. Once the bubble is within that zone, recline the chair. Ensure the seat belt is properly routed. The rear-facing seat belt should be threaded through the blue labeled path and out the opposite end.
It may look like the lower anchors, but there's only one per set of lower anchors. In an SUV or minivan, the tether anchor is most often found on the back of the vehicle seat where the car seat is installed. However, in a sedan it is always on the shelf below the rear windshield. A few vehicles, most often SUVs or station wagons, have a tether anchor on the ceiling above and behind the back seat. The vehicle owner's manual can give you the exact location of any tether anchors in your vehicle.
With a few exceptions such as convertibles or cars without back seats , there will be a tether anchor to go along with each set of lower anchors, and there is almost always at least one additional tether anchor, as well, that can be used along with a seat belt installation tethers must be used for all forward-facing installations, whether with lower anchors or seat belt. For pickup trucks, the tether anchors may look vastly different than in other vehicles.
They may even be loops of webbing instead of metal. You must read the vehicle owner's manual to learn how to use this type of tether anchor. It is one of the only types where more than one car seat could share an anchor.
Car seats have a way to connect to the lower anchors. Most use a strap with some type of a hook that connects to the vehicle's lower anchors. A few car seats have rigid LATCH where the connectors are rigidly attached to the frame of the child's car seat and there is no strap involved.
All forward-facing car seats have a tether strap, which is a strap with a hook on the end that comes from the head of the child's car seat and connects to the tether anchor in the vehicle. The LATCH system was designed to allow seat belts to be optimized for restraining the human body and the lower anchors for installing a car seat. For some car seats, rear-facing car seats in particular, another advantage of installation with the lower anchors is that the car seat won't tilt to the side due to pressure from the shoulder portion of the vehicle's seat belt.
A seat belt installation where the seat belt's built-in locking mode is used will often cause a tilt. A seat belt installation using a built-in seat belt locking device on the car seat which means you don't have to use the seat belt's own locking mechanism won't tilt the car seat. Seats with rigid LATCH which are less common offer a much easier installation than those with a lower anchor strap.
Consult the car seat instruction manual for information on the specific LATCH pieces on your car seat, including how to route the lower anchor strap if it is a convertible car seat. The stickers on the side of the car seat will also give some basic directions on LATCH usage for your particular car seat.
The safest installation method is the one that offers the most secure installation the seat moves as little as possible, always less than one inch in any direction. If you want to install the car seat in a rear center position, that usually requires using the seat belt.
Most vehicles do not have a set of lower anchors dedicated to the middle seat, and most do not allow the use of the inner anchors from either side for installation in the center. Check the vehicle owner's manual to see if this is allowed. You'll also need to consult the car seat owner's manual to see if the manufacturer approves of the use of their seat with non-standard spacing of lower anchors.
You may have heard that the center seat is the safest, which is true, statistically, though only slightly.
0コメント